Jerusalem, Israel, February 2008, Optimet
is glad to announce an enhancement of multiple sensor integration capability. This option is applicable for various Optimet sensors. Based on this enhancement, Optimet recently completed a successful integration of multiple sensors in an in-process inspection solution. This capability enables a simultaneous profile and thickness measurement for high precision on-line inspection using synchronized multiple NanoConoprobe sensors at 3000Hz each.
Read
more...
Jerusalem, Israel, November 2007, Optimet
introduces a new Probe Emulator software utility. The Probe Emulator allows the user to fully integrate Optimet sensors into any software application without having to physically connect an actual sensor. The Probe Emulator fully simulates the behavior of the Smart
ConoProbe, the ConoProbe Mark 3.0, and the NanoConoProbe.
Read
more...
Jerusalem, Israel, September 2007, Optimet introduces the NanoConoprobe – for unprecedented profile, 3-D and thickness measurement of glass, transparent materials, wet surfaces and mirror surfaces in the same set-up with resolution of up to several nanometers.
Read
more...
Jerusalem, Israel, April 2007, Optimet As of January 2007 Optimet is supplying Mark 3.0 ConoProbes. The Mark 3.0 ConoProbe incorporates additional improvements and features in comparison with the current Mark 2.0 ConoProbe:
Read
more...
Jerusalem, Israel, July 2006, Optimet introduces the ConoProbe HRS –with enhanced capabilities for measurement on Highly Reflective Surfaces.
Read
more...
Jerusalem Israel, October 2005 - Optimet
introduces a flexible integration utilizing multiple
Smart ConoProbe non-contact sensors in one system, providing
a simple, powerful solution for measuring complex surfaces,
thicknesses, lengths, angles and radiuses.
Read more...
Jerusalem Israel, July 2005 - Optimet
introduces the Smart ConoProbe (Smart) which is the
new generation of single point, non-contact sensors
developed and manufactured by Optimet. the Smart is
a state of the art sensor, which is the culmination
of 5 years of field experience with over 100 OEM applications
around the world.
Read
more...
ISO 9001 : 2000 to Optimet
ISRAEL, Feb. 2004 - Optimet
has been audited by SII and found to comply with the
quality Management Standard SI ISO 9001:2000
(View
certificate)
IQ NET Certificate to Optimet
ISRAEL, Feb. 2004 - Optimet has implemented
and maintains a Quality Management System which fulfills
the requirements of the standard: ISO 9001:2000
(view
certificate)
Optimet Introduces Laser Beam Measurement System
Jerusalem , Israel August 2003
– Optimet, introduces their newest accessory,
the Periscope, an extension for the Optimet ConoProbe,
that can "bend" the laser beam 90°. The
Periscope can measure inner profiles and surfaces of
pipes, tubes and cylinders. When two systems are utilized,
pipe wall thickness can be measured. This accessory
can be customized in lengths up to 20".
The ConoProbe is designed for making
noncontact, precision measurements of machine parts
and tools, plastic and rubber industrial molds and components,
automotive components, electronic components and more.
The ConoProbe measures a variety of
surfaces such as machined metals and other relatively
shiny objects regardless of the reflectivity of the
surface. The probe can also measure at angles close
to grazing incidence with the "Forbidden Zone"
extending only 5 degrees from normal incidence from
all directions. The ConoProbe is collinear, so blind
corners can be measured with bending optics.
Optimet manufactures non-contact
optical equipment for distance measurement and three-dimensional
mapping of objects. Optimet's products are sold worldwide
in over 25 countries.
Danvers, MA May 2002 – Optimet, the developer
and manufacturer of radically new non-contact 3-dimensional
measurement systems, announces that Acu-Gage
Systems, Manchester, NH, will integrate the
Optimet ConoProbe 3-dimensional measurement system into
their non-contact, video-based measuring equipment.
Optimet's ConoProbe is designed primarily
for integration by OEM users into their measurement
systems. The technology is suited to on-line or off-line
measurement and can be integrated into the host scanning
or positioning system. While in movement, the ConoProbe
measures up to 1000 points per second on the fly.
Throughout its history, Acu-Gage has
provided leading-edge technology for metrology solutions.
This integration by Acu-Gage will provide the first
commercially available turnkey Optimet/Video CMM combination
in the United States today. "With the Optimet ConoProbe,
we can offer our clients precise, fast, point to point
measurements of most any surfaces", states Acu-Gage's
Lisa Caron. "Our clients find the reverse engineering
capabilities that the ConoProbe brings to be extremely
beneficial. The ConoProbe is an ideal complement to
the two-dimensional world of video measuring by providing
a third-dimensional contouring capability."
Acu-Gage systems, integrating Metronics
metrology software, are used throughout the world in
a wide variety of applications and industries. Metronics
leads the industry in developing metrology systems that
integrate fully with the world's leading precision metrology
instrument manufacturers.
Acu-Gage Systems' Gantry Style Video
Coordinate Measuring Machines design minimizes the footprint
of their equipment allowing for larger measuring surfaces.
The Acu-Gage "bridge" design eliminates the
need for fixturing parts -- a critical feature when
measuring contact sensitive parts. Acu-Gage offers the
largest measuring platforms in the industry with standard
measuring surfaces up to 48" x 72" and custom
products available in even larger sizes.
Last Update:
février 11, 2008
Site
Map
|
