|
ConoProbe Accessories
Lenses -
Designed to work with interchangeable lenses, the ConoProbe
easily processes an impressive variety of working ranges.
The table below describes the performance of the ConoProbe
with each one of the available lenses
| |
Standard
|
| Lens Assembly (Focal Length in mm) |
16
|
25
|
50
|
75
|
100
|
150
|
250
|
| Precision (m) |
<2
|
<3
|
<6
|
<10
|
<15
|
<35
|
<50
|
| Working Range (mm) |
0.6
|
1.8
|
8
|
18
|
35
|
70
|
180
|
| Picture |
|
|
|
|
|
|
|
| |
Extended(1)
|
High Definition
|
| Lens Assembly (Focal Length in mm) |
50ext
|
125ext
|
16
|
25
|
50
|
| Precision (m) |
<6
|
<20
|
<0.5
|
<1
|
<2.5
|
| Working Range (mm) |
8
|
45
|
0.2
|
0.6
|
2
|
| Picture |
|
|
|
|
|
- Optimet can supply per requirement
extended lenses with focal lengths within the range
of 50mm – 250mm. The lenses shown here are only
examples.
Video Camera (CCTV)
Optimet offers a camera through
which a video picture of the object and the sensor’s
laser spot are viewed, thus the user can quickly direct
the sensor’s beam exactly to the area being measured.
The camera complies with NTSC or PAL standards and is
inserted between the ConoProbe and the objective lens.
Periscope
Since the ConoProbe is a co-linear
device, the Periscope can measure inner profiles and
surfaces such as pipes, tubes and cylinders. It bends
the line of sight in order to measure objects at any
desired angle. Using Optimet's periscope inserted between
the ConoProbe and the objective lens, the entire inner
surface of a pipe may be measured just by turning the
pipe on its axis. Periscopes can be designed according
to customer request.
Machine Vision Adaptors
Machine vision producers operate machines
that conduct highly precise and reliable X,Y measurements.
These machines have several limitations concerning the
Z axis (height/depth measurement). Opto*
and Navitar have developed special adaptors, which combine
the Optimet sensor within the vision system itself.
This combination provides a full X,Y,Z measurement solution
with one beam.
Accessories for the ConoLine
Lenses - The ConoLine
is designed for use with interchangeable lenses for
processing a variety of working ranges. The table below
describes the performance of the ConoLine with each
one of the available lenses.
| Lens Assembly (Focal
Length in mm) |
25
|
50
|
75
|
100
|
125
|
| Precision (m) |
5
|
15
|
18
|
47
|
70
|
| Working Range (mm) |
1.8
|
8
|
18
|
30
|
45
|
| Picture |
|
|
|
|
|
Accessories for the MicroConoProbe
Lenses - The MicroConoprobe
provides various accuracies when fitted with the 5X,10X,20X
and 40X standard microscope objective lenses. The table
below describes the performance of the MicroConoprobe
with the available lenses.
| Lens |
5X
|
10X
|
20X
|
40X1
|
| Precision (nm) r.m.s |
400
|
100
|
25-50
|
10
|
¹ The X40 necessitates an air
bearings table for highest performance.
Last Update:
October 25, 2007
Site
Map
|
