- E. Laso, F. Obeso, Y. Malet, C. Nerriec, V. Patera, and I. Alvarez, “OMEGA: novel optical sensor 3D measuring system for complex geometry in adverse environment,” Proc. SPIE 2406, Practical Holography IX, 235 (1995)
http://dx.doi.org/10.1117/12.206224 - C. Scheiber, Y. Malet, G. Sirat, and D. Grucker, “Nuclear medicine image registration by spatially noncoherent interferometry,” J. Nucl. Med. 41, 375-382 (2000)
http://jnm.snmjournals.org/content/41/2/375.full.pdf - P. M. Lonardo and A.A. Bruzzone, "Measurement and Topography Characterisation of Surfaces Produced by Selective Laser Sintering," CIRP Ann. Manuf. Technol. 49 (1), 427–430 (2000)
http://dx.doi.org/10.1016/S0007-8506(07)62981-3 - G. S. Spagnolo, L. Cozzella, and C. Simonetti, "Superposed strokes analysis by conoscopic holography as an aid for a handwriting expert,"
J. Opt. A: Pure Appl. Opt. 6, 869 (2004)
http://dx.doi.org/10.1088/1464-4258/6/9/009 - M. S. Anderson, "Simultaneous conoscopic holography and Raman spectroscopy," NASA Tech Briefs, 26-27 May 2005
http://www.techbriefs.com/component/content/article/296 - L.-F. Sancho, J. Diaz, and I. Alvarez, "Application of conoscopic holography to control the melt stirring," Rev. Metall. 103 (03), 121–130 (2006)
http://dx.doi.org/10.1051/metal:2006117 - V. Srivatsan, R. Katz, and D. Dutta, "Fixtureless sensor standoff control for high-precision dimensional inspection of freeform parts,"
J. Manuf. Sci. Eng. 129(1), 172–179 (2006)
http://dx.doi.org/10.1115/1.2401621 - J. M. Enguita, I. Alvarez, C. F. Bobis, J. Marina, Y. Fernández, and G. Y. Sirat, "Conoscopic holography-based long-standoff profilometer for surface inspection in adverse environment," Opt. Eng. 45(07), 073602 (2006)
http://dx.doi.org/10.1117/1.2219097 - Y. Klein, E. Efrati, and E. Sharon, "Shaping of elastic sheets by prescription of non-Euclidean metrics," Science 315 1116–1119 (2007)
http://dx.doi.org/10.1126/science.1135994 - L. Zhu, J. Barhak, V. Srivatsan, and R. Katz, "Efficient registration for precision inspection of free-form surfaces," Int. J. Adv. Manuf. Technol. 32 (5-6), 505–515 (2007)
http://dx.doi.org/10.1007/s00170-005-0370-9 - E. Efrati, Y. Klein, H. Aharoni, and E. Sharon, "Spontaneous buckling of elastic sheets with a prescribed non-Euclidean metric," Physica D 235, 29–32 (2007)
http://dx.doi.org/10.1016/j.physd.2007.04.024 - L. Pezzati and R. Fontana, in Handbook on the use of lasers in conservation and conservation science, chapter 3.2 (COST Office, Brussels, 2008)
- J. M. Enguita, I. Álvarez , J. Marina, G. Ojea, J. A. Cancelas, and M. Frade, "Toward extended range sub-micron conoscopic holography profilometers using multiple wavelengths and phase measurement," Proc. SPIE 7356, Optical Sensors (2009)
http://dx.doi.org/10.1117/12.819456 - R. A. Lathrop, T. T. Cheng , and R. J. Webster III, "Conoscopic holography for image registration: a feasibility study," Proc. SPIE 7261, Medical Imaging 2009: Visualization, Image-Guided Procedures, and Modeling (2009)
http://dx.doi.org/10.1117/12.813903 - R. A. Lathrop, T. T. Cheng and R. J. Webster, "Laparoscopic image guidance via conoscopic holography," J. Med. Devices 3(2), 027546 (2009)
http://dx.doi.org/10.1115/1.3136754 - I. Álvarez, J. M. Enguita, M. Frade, J. Marina, and G. Ojea, "On-line metrology with conoscopic holography: beyond triangulation," Sensors 9, 7021–7037 (2009)
http://dx.doi.org/10.3390/s90907021 - R. A. Lathrop, D. M. Hackworth, and R. J. Webster III, "Minimally Invasive holographic surface scanning for soft-tissue image registration," IEEE Trans. Biomed. Eng. 57 (6), 1497–1506 (2010)
http://dx.doi.org/10.1109/TBME.2010.2040736 - R. Bogue, "Three-dimensional measurements: a review of technologies and applications," Sensor Review 30, 102-106 (2010)
http://dx.doi.org/10.1108/02602281011022670 - S. Holst, A. Persson, M. Wichmann, and M. Karl, "Digitizing implant position locators on master casts: comparison of a noncontact scanner and a contact-probe scanner," Int. J. Oral Maxillofac Implants 27(1), 29–35 (2012)
http://www.ncbi.nlm.nih.gov/pubmed/?term=22299075 - R. M. Bentz and S. F. Balshi, "Complete oral rehabilitation with implants using CAD/CAM technology, stereolithography, and conoscopic holography," Implant Dent. 21(1) 8-12 (2012)
http://dx.doi.org/10.1097/ID.0b013e318243a1aa - G. S. Spagnolo, L. Cozzella, and C. Simonetti, "Linear conoscopic holography as aid for forensic handwriting expert," Optik 124, 2155–2160 (2013)
http://dx.doi.org/10.1016/j.ijleo.2012.06.097 - P. Fernández, D. Blanco, G. Valiño, H. Hoang, L. Suárez, and S. Mateos, "Integration of a conoscopic holography sensor on a CMM," AIP Conf. Proc. 1431, 225-232 (2012)
http://dx.doi.org/10.1063/1.4707569 - D. Blanco, G. Valiño, P. Fernández, J. C. Rico, and S. Palomo, "Influence of roughness on conoscopic holography digitizing of DIN34CrMo4 surfaces," Proc. Eng. 63, 472–480 (2013)
http://dx.doi.org/10.1016/j.proeng.2013.08.259 - A. L. Simpson, J. Burgner, C. L. Glisson, S. D. Herrell, B. Ma, T. S. Pheiffer, R. J. Webster, and M. I. Miga, "Comparison study of intraoperative surface acquisition methods for surgical navigation," IEEE Trans Biomed Eng. 60, 1090-1099 (2013)
http://dx.doi.org/10.1109/TBME.2012.2215033 - J. Burgner, A. L. Simpson, J. M. Fitzpatrick, R. A. Lathrop, S. D. Herrell, M. I. Miga, and R. J. Webster III, "A study on the theoretical and practical accuracy of conoscopic holography-based surface measurements: toward image registration in minimally invasive surgery," Int. J Med. Robot. 9(2), 190–203 (2013)
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3819208/ - P. Fernández, D. Blanco, C. Rico, G. Valiño, and S. Mateos, "Influence of surface position along the working range of conoscopic holography sensors on dimensional verification of AISI 316 wire EDM machined surfaces," Sensors 14 4495-4512 (2014)
http://dx.doi.org/10.3390/s140304495 - A. L. Simpson, K. Sun, T. S. Pheiffer, D. C. Rucker, A. K. Sills, R. C. Thompson, and M. I. Miga, " Evaluation of conoscopic holography for estimating tumor resection cavities in model-based image-guided neurosurgery," IEEE Trans. Biomed. Eng. 61, 1833-1843 (2014)
http://dx.doi.org/10.1109/TBME.2014.2308299 - H. P. Hoang, H. M. To, and S. L. Ko, “Measurement technology using Z axis adaptation for burrs formed on curved surfaces,” J. Mech. Sci. Technol. 29, 3459-3465 (2015)
http://dx.doi.org/10.1007/s12206-015-0744-3 - D. Blanco, G. Valiño, , P. Fernández, J. Carlos Rico, and S. Mateos, “Influence of part material and sensor adjustment on the quality of digitised point-clouds using conoscopic holography,” Precis. Eng. 42, 45-52 (2015)
http://dx.doi.org/10.1016/j.precisioneng.2015.03.008 - J. Carlos Rico, G. Valiño, P. Fernández, P. Zapico, D. Blanco, S. Mateos “Adjustment recommendations of a conoscopic holography sensor for a reliable scanning of surfaces with roughness grades obtained by different processes,” Precis. Eng. 42, 335-345 (2015)
http://dx.doi.org/10.1016/j.precisioneng.2015.04.011 - L. M. Galantucci, M. Pesce, and F. Lavecchia, “A powerful scanning methodology for 3D measurements of small parts with complex surfaces and sub millimeter-sized features, based on close range photogrammetry,” Precis. Eng. (2015)
http://dx.doi.org/10.1016/j.precisioneng.2015.07.010
参考文献
下記のリストはオプティメット社の製品を独自に使用した文献リストの一部です。