Metallic Surface Scan  

Executive Summary

Optimet’s ConoProbe MK10 with 75 mm and 100 mm focal lenses was to scan a metallic surface. The main industrial application is related to the samples’ height, radius, angles and roughness. Three different kinds of samples were measured during the inspection, all of them with highly accurate results:
  • Colored specimens
  • Steel and aluminum plates  
  • Contoured plates 

All of the samples are highly reflective, but due to Optimet technology’s capability to measure all kinds of objects, we were able to obtain optimal performances.

1. Optimet's Advantages over Other Technologies:

1. Due to the Conoprobe sensor’s capability to change laser’s power and SNR filter optimal methods of scanning are easily reached for reflective areas.

2. Unique collinear technology  

3. Capability to measure sharp angles in minimum clearance  

4. High sampling rate

5.High lateral resolution

2.Application Description

Three kinds of metallic surfaces scanned using Optimet’s ConoProbe MK10 with 75 mm and 100mm focal lenses.

3. Results and Observations

Colored Specimens

Steel and Aluminum Plates

Contoured Plates

4. Data

For 75mm and 100mm focal lenses:
Parameter Value
Reflective/Diffusive/Transparent/Translucent Reflective
Working Range (mm) 18/35
Precision (µm) 10/15
Stand Off (mm) 60/70
Max. Data Rate (KHz) 9KHz
Lateral Resolution  -
Z Resolution  -
Application Category -

Download Metallic Surface Scan file (pdf)